Beamforming for Magnetic Induction based Wireless Power Transfer Systems with Multiple Receivers

Magnetic induction (MI) based communication and power transfer systems have gained an increased attention in the recent years. Typical applications for these systems lie in the area of wireless charging, near-field communication, and wireless sensor networks. For an optimal system performance, the power efficiency needs to be maximized. Typically, this optimization refers to the impedance matching and tracking of the split-frequencies. However, an important role of magnitude and phase of the input signal has been mostly overlooked. Especially for the wireless power transfer systems with multiple transmitter coils, the optimization of the transmit signals can dramatically improve the power efficiency. In this work, we propose an iterative algorithm for the optimization of the transmit signals for a transmitter with three orthogonal coils and multiple single coil receivers. The proposed scheme significantly outperforms the traditional baseline algorithms in terms of power efficiency.Comment: This paper has been accepted for presentation at IEEE GLOBECOM 2015. It has 7 pages and 5 figure

On Capacity of Active Relaying in Magnetic Induction based Wireless Underground Sensor Networks

Wireless underground sensor networks (WUSNs) present a variety of new research challenges. Magnetic induction (MI) based transmission has been proposed to overcome the very harsh propagation conditions in underground communications in recent years. In this approach, induction coils are utilized as antennas in the sensor nodes. This solution achieves longer transmission ranges compared to the traditional electromagnetic (EM) waves based approach. Furthermore, a passive relaying technique has been proposed in the literature where additional resonant circuits are deployed between the nodes. However, this solution is shown to provide only a limited performance improvement under practical system design contraints. In this work, the potential of an active relay device is investigated which may improve the performance of the system by combining the benefits of the traditional wireless relaying and the MI based signal transmission.Comment: This paper has been accepted for presentation at IEEE ICC 2015. It has 6 pages, 5 figures (4 colored), and 17 reference

Fully probabilistic deep models for forward and inverse problems in parametric PDEs

We introduce a physics-driven deep latent variable model (PDDLVM) to learn simultaneously parameter-to-solution (forward) and solution-to-parameter (inverse) maps of parametric partial differential equations (PDEs). Our formulation leverages conventional PDE discretization techniques, deep neural networks, probabilistic modelling, and variational inference to assemble a fully probabilistic coherent framework. In the posited probabilistic model, both the forward and inverse maps are approximated as Gaussian distributions with a mean and covariance parameterized by deep neural networks. The PDE residual is assumed to be an observed random vector of value zero, hence we model it as a random vector with a zero mean and a user-prescribed covariance. The model is trained by maximizing the probability, that is the evidence or marginal likelihood, of observing a residual of zero by maximizing the evidence lower bound (ELBO). Consequently, the proposed methodology does not require any independent PDE solves and is physics-informed at training time, allowing the real-time solution of PDE forward and inverse problems after training. The proposed framework can be easily extended to seamlessly integrate observed data to solve inverse problems and to build generative models. We demonstrate the efficiency and robustness of our method on finite element discretized parametric PDE problems such as linear and nonlinear Poisson problems, elastic shells with complex 3D geometries, and time-dependent nonlinear and inhomogeneous PDEs using a physics-informed neural network (PINN) discretization. We achieve up to three orders of magnitude speed-up after training compared to traditional finite element method (FEM), while outputting coherent uncertainty estimates

An analysis on decentralized adaptive MAC protocols for Cognitive Radio networks

The scarcity of bandwidth in the radio spectrum has become more vital since the demand for more and more wireless applications has increased. Most of the spectrum bands have been allocated although many studies have shown that these bands are significantly underutilized most of the time. The problem of unavailability of spectrum and inefficiency in its utilization has been smartly addressed by the Cognitive Radio (CR) Technology which is an opportunistic network that senses the environment, observes the network changes, and then using knowledge gained from the prior interaction with the network, makes intelligent decisions by dynamically adapting their transmission characteristics. In this paper some of the decentralized adaptive MAC protocols for CR networks have been critically analyzed and a novel adaptive MAC protocol for CR networks, DNG-MAC which is decentralized and non-global in nature, has been proposed. The results show the DNG-MAC out performs other CR MAC protocols in terms of time and energy efficiency

Topology Analysis of Wireless Sensor Networks for Sandstorm Monitoring

Sandstorms are serious natural disasters, which are commonly seen in the Middle East, Northern Africa, and Northern China.In these regions, sandstorms have caused massive damages to the natural environment, national economy, and human health. To avoid such damages, it is necessary to effectively monitor the origin and development of sandstorms. To this end, wireless sensor networks (WSNs) can be deployed in the regions where sandstorms generally originate so that sensor nodes can collaboratively perform sandstorm monitoring and rapidly convey the observations to remote administration center. Despite the potential advantages, the deployment of WSNs in the vicinity of sandstorms faces many unique challenges, such as the temporally buried sensors and increased path loss during sandstorms. Consequently, the WSNs may experience frequent disconnections during the sandstorms. This further leads to dynamically changing topology. In this paper, a topology analysis of the WSNs for sandstorm monitoring is performed. Four types of channels a sensor can utilize during sandstorms are analyzed, which include air-to-air channel, air-to-sand channel, sand-to-air channel, and sand-to-sand channel. Based on the channel model solutions, a percolation-based connectivity analysis is performed. It is shown that if the sensors are buried in low depth, allowing sensor to use multiple types of channels improves network connectivity. Accordingly, much smaller sensor density is required compared to the case, where only terrestrial air channels are used. Through this topology analysis a WSN architecture can be deployed for very efficient sandstorm monitoring

Topology Analysis of Wireless Sensor Networks for Sandstorm Monitoring

Sandstorms are serious natural disasters, which are commonly seen in the Middle East, Northern Africa, and Northern China.In these regions, sandstorms have caused massive damages to the natural environment, national economy, and human health. To avoid such damages, it is necessary to effectively monitor the origin and development of sandstorms. To this end, wireless sensor networks (WSNs) can be deployed in the regions where sandstorms generally originate so that sensor nodes can collaboratively perform sandstorm monitoring and rapidly convey the observations to remote administration center. Despite the potential advantages, the deployment of WSNs in the vicinity of sandstorms faces many unique challenges, such as the temporally buried sensors and increased path loss during sandstorms. Consequently, the WSNs may experience frequent disconnections during the sandstorms. This further leads to dynamically changing topology. In this paper, a topology analysis of the WSNs for sandstorm monitoring is performed. Four types of channels a sensor can utilize during sandstorms are analyzed, which include air-to-air channel, air-to-sand channel, sand-to-air channel, and sand-to-sand channel. Based on the channel model solutions, a percolation-based connectivity analysis is performed. It is shown that if the sensors are buried in low depth, allowing sensor to use multiple types of channels improves network connectivity. Accordingly, much smaller sensor density is required compared to the case, where only terrestrial air channels are used. Through this topology analysis a WSN architecture can be deployed for very efficient sandstorm monitoring

A New routing metric for satisfying both energy and delay constraints in wireless sensor networks

International audienceBesides energy constraint, wireless sensor networks should also be able to provide bounded communication delay when they are used to support real-time applications. In this paper, a new routing metric is proposed. It takes into account both energy and delay constraints. By mathematical analysis and simulations, we have shown the efficiency of this new routing metric

A New Routing Metric for Satisfying Both Energy and Delay Constraints in Wireless Sensor Networks

Available on-line at url http://www.springerlink.com/content/683u7116lj67635k/International audienceBesides energy constraint, wireless sensor networks should also be able to provide bounded communication delay when they are used to support real-time applications. In this paper, a new routing metric is proposed. It takes into account both energy and delay constraints. It can be used in AODV. By mathematical analysis and simulations, we have shown the efficiency of this new routing metric

A Hybrid Global Minimization Scheme for Accurate Source Localization in Sensor Networks

We consider the localization problem of multiple wideband sources in a multi-path environment by coherently taking into account the attenuation characteristics and the time delays in the reception of the signal. Our proposed method leaves the space for unavailability of an accurate signal attenuation model in the environment by considering the model as an unknown function with reasonable prior assumptions about its functional space. Such approach is capable of enhancing the localization performance compared to only utilizing the signal attenuation information or the time delays. In this paper, the localization problem is modeled as a cost function in terms of the source locations, attenuation model parameters and the multi-path parameters. To globally perform the minimization, we propose a hybrid algorithm combining the differential evolution algorithm with the Levenberg-Marquardt algorithm. Besides the proposed combination of optimization schemes, supporting the technical details such as closed forms of cost function sensitivity matrices are provided. Finally, the validity of the proposed method is examined in several localization scenarios, taking into account the noise in the environment, the multi-path phenomenon and considering the sensors not being synchronized